PRO 1HP Water Pump, 3430GPH Submersible Portable Clean Water Pumpe with Automatic Float Switch for Basement Flooding, Draining, Swimming Pool

PROSTORMER 1HP Water Pump, 3430GPH Submersible Portable Clean Water Pumpe with Automatic Float Switch for Basement Flooding, Draining, Swimming Pool Kindly Tips : When you start use the pump you must be submerged into the water at a slight angle to allow the remaining air to escape and the water temperature must not exceed 35℃, otherwise the device may not pump water out or may not work completely Kindly Tips : The minimum operating depth of this water pump is 65mm. The water pump should not be used for more than 2 minutes without water. If it is used without water, the motor has overheat protection function, so please wait for 15 minutes and wait for the motor to cool before using it again Kindly Tips : The pump is only suitable for clean water. The impurity particles are less than 1mm. If it is used to pump other sewage, the machine will be damaged Powerful Sump Pump : Equipped with 1HP power motor can deliver up to 3430GPH and max delivery height can be reached 20 feet . Suitable for ponds, swimming pools, sprinkler systems, irrigation systems, gardening, rain buckets, flooded basement Auto Float Switch : When the water level rises above the pump, the pump will automatically start working under the control of the float switch. When the water level is below the pump, you should lift the float for pumping. Note: Once the pump fails to pump water, you should immediately lower the float switch or cut off the power. Otherwise, it will cause the coil to burn out

• Muti Outlet Water : There have a 6 outlets can choose from according to the flow rate , The bigger the flow is, the wider the outlet should be
• Overheat Protection : The water pump is provided with a thermal protection circuit which is activated by overheating of the pump and then switches the device off
• High - Quality Material : The pump adopts thermoplastic composite material, which is more durable and anti-corrosion, thus extending the service life of the pump
• Kindly Tips: If the device switches off after a brief runtime:Check whether the water temperature is too high.The device might have overheated due to a too high water temperature and the thermal protection circuit is activated.Check the power connection.Check the power cable and mains plug for damages.Check the on-site fusing.Check whether the hoses are blocked and whether the water contains any suspended matter with a particle size of more than 1 mm,which could clog up the device.The device might have overheated due to the blockage and the thermal protection circuit is activated.
• Kindly Tips: If the device is running, but not pumping any waterCheck the inside of the device for any remaining air. To do so, lower the device into the water at a slight angle and wait for the entire air to escape.Check whether the minimum water level has been reached, see technical data. In order to start pumping, the device requires a minimum water level.Check whether the hoses are blocked and whether the water contains any suspended matter with a particle size of more than 1mm,which could clog up the device.Check whether the used hose diameter is too small.Check whether the hose line is kinked or blocked.Remove kinks and / or blockages.Check reducer and/or outlet for blockages.
• NoticeWait for at least 3 minutes after maintenance and repair work.Only then switch the device back on.